This product can be produced with an inner drum length of 2.5 meters to 4.2 meters. The product was designed in 2011 and its external appearance resembles a crocodile. The product suspension system is provided with air bellows, it works with less vibration and has a longer life compared to wheeled models. (The suspension system of the product can be adapted to all wheeled models.)

The Importance of Carpet Wringing / Centrifuge  Machine
Carpet wringing machine is an indispensable machine for carpet washing factories. Carpets may take 4 to 7 days to dry without this product. Water flowing from wet hung carpets can dye carpet fringes, overlock areas and carpet. Carpet that has been suspended for a long time may gather dust again due to moisture. With the roller centrifugal carpet wringing machine, these problems can be overcome and the carpet delivery can be reduced up to 1 day. Carpets are almost 90-95% dry and come out of the wringer as if they were ironed.With the squeezing / centrifuging process, dust, skin debris and mites on the carpet are removed by mixing with water.

The Importance of Centrifuge in Carpet Drying
Carpets coming out of this machine are completely dry in 2 to 8 hours in a hanger area at normal temperature and become ready for packaging.Drying time of carpets can be reduced to 2 hours in specially insulated drying rooms.

Rinsing the Carpet in the Carpet Wringing / Centrifuge Machine
The carpet Centrifuge machine can be used for rinsing as well as drying the carpet. Adding this feature to the machine for the first time in 2005, Gar-Mak has made it very easy to rinse the washed carpet completely. Carpet piles that are not fully rinsed harden with the effect of the chemical detergents. After the carpet is shampooed and rubbed with a brush, it is rinsed by scraping with the squeegee method. In addition, the carpets that are rinsed in the carpet wringing / centrifuge machine get a noticeable shine and softness. In order to provide extra softness, softener chemical diluted with water can be applied on the carpet after stripping.

Roller Centrifuge vs. Cauldron Type Centrifuge
Roll carpet centrifuge machine is quite comfortable compared to the cauldron type centrifuges used in the past and still being used in some companies. In cauldron-type centrifuges, the carpet is rolled longitudinally and shaped into a bagel and placed in the cauldron. It takes at least 1 minute to fold an average-sized carpet in this way. In addition, since wet carpets become at least 5 times as heavy as their own weight, placing them in the machine also increases numbers of labor. Carpets that cannot be placed in the machine properly may be broken, and even some old and hard carpets can be torn in cauldron type centrifuges. Despite these disadvantages, these machines still continue to be used for the wringing of large carpets.


Our Carpet Spinning Machines

  • It has tubular, roll centrifuge technology, which provides a squeezing function without breaking the carpets.
  • It has a squeezing, centrifuging power of 90% to 95% in 2 to 5 minutes on washed carpets.
  • The inner drum material is produced from 304 quality chrome-nickel mixed stainless steel, which is guaranteed not to rust for lifetime in wet processes.
  • The outer drum is made of hard steel and protected with Epoxy paint to prevent rust.
  • Bellows suspension is used against shaking and vibration.
  • The cover is produced with a practical lock system that allows it to be opened and closed with a single movement.
  • It is produced with a lid rinsing system.
  • The cover has a grip system and is produced in accordance with general safety conditions.  
  • Carpet Winding Direction; The electrical system can be produced optionally with a timer and magnetic brake.
  • It is very easy to maintain and use.
  • The product is guaranteed for 2 years.

 

Our Carpet Spinning, centrifuging Machines:

  • They have tubular, roll centrifuge technology, which provides a squeezing function without breaking the carpets.
  • They have a squeezing, centrifuging power of 90% to 95% in 2 to 5 minutes on washed carpets.
  • The inner drum material is produced from 304 quality chrome-nickel mixed stainless steel, which is guaranteed not to rust for lifetime in wet processes.
  • The outer drum is made of hard steel and protected with Epoxy paint to prevent rust.
    Bellows suspension is used against shaking and vibration.
  • The cover is produced with a practical lock system that allows them to be opened and closed with a single movement.
  • They have produced with a lid rinsing system.
  • The cover has a grip system and is produced in accordance with general safety conditions.
  • Carpet Winding Direction; The electrical system can be produced optionally with a timer and magnetic brake.
  • They are very easy to maintain and use.
  • The product is guaranteed for 2 years..
  • The carpet is wrapped as in the figure and put into the machine. (The last layer of the carpet should be in the same direction as the motor rotation direction.)
  • Depending on the carpet type, the timer is set between 2 seconds and 5 minutes. (For some carpets with high stitch density, the machine may need to run for 5 minutes.)
  • The machine is started and after 20 seconds the rinse water is turned on.
  • Carpet Winding Shape; This process is not used for rinsed carpets in order not to waste time.
  • After a while, the valve is closed and it is waited until all the water that has penetrated into the carpet is removed.
  • The optionally installed counter automatically stops and brakes when the time is up. (The personnel observes the water cut-off in the machines without panel and stops the machine with the help of the switch.)
  • The carpet is rolled out of the machine and placed on the hanger.
  • Thanks to the roll centrifuge technology, the carpets do not break, fold, burst or open the yarn.
Ürün KoduG1425G1427G1032G1035G1042
Görsel
Kullanım Genişliği250 cm270 cm320 cm350 cm420 cm
MalzemeGalvanizGalvanizGalvanizGalvanizGalvaniz
İç çap397 mm397 mm477 mm477 mm477 mm
Tambur Hızı1300 RPM1300 RPM1000 RPM1000 RPM1000 RPM
Motor Gücü5,5 kw/sa5,5 kw/sa5,5 kw/sa7,5 kw/sa10 kw/sa
Elektrik Tüketimi2,0 kw/sa2,0 kw/sa2,0 kw/sa2,5 kw/sa3 kw/sa
Elektrik Besleme*3 Faz
380 Volt
50 Hz
3 Faz
380 Volt
50 Hz
3 Faz
380 Volt
50 Hz
3 Faz
380 Volt
50 Hz
3 Faz
380 Volt
50 Hz
Kontrol PaneliButon PanelButon PanelButon PanelButon PanelButon Panel
İdeal Çalışma Zamanı90 sn90 sn90 sn90 sn90 sn
Fren Sistemi
Hız KontrolüOpsiyonelOpsiyonelOpsiyonelOpsiyonelOpsiyonel
Yumuşak Kalkış
Kapasite250x1000cm270x1000cm320x1200cm350x1200cm420x1200cm
SertifikaCE, GOST-RCE, GOST-RCE, GOST-RCE, GOST-RCE, GOST-R
Garanti1 Yıl1 Yıl1 Yıl1 Yıl1 Yıl
En125 cm125 cm125 cm125 cm125 cm
Yükseklik140 cm140 cm140 cm140 cm140 cm
Boy300 cm320 cm370 cm420 cm490 cm
Ağırlık800 kg850 kg900 kg1050 kg1200 kg
AksesuarlarHalı Aktarma
Arabası
Halı Aktarma
Arabası
Halı Aktarma
Arabası
Halı Aktarma
Arabası
Halı Aktarma
Arabası
*İsteğe bağlı olarak 60 Hz üretilebilir.
- Özel ölçülerde üretim yapılmaktadır.
- Galvaniz makineler sıcak galvaniz havuzlarında galvanize edilmektedir.
Ürün KoduT1017T1326T1327T1032T1035T1042
Görsel
Kullanım Genişliği170 cm257 cm270 cm320 cm350 cm420 cm
MalzemeÇelikÇelikÇelikÇelikÇelikÇelik
İç çap477 mm355 mm397 mm477 mm477 mm477 mm
Tambur Hızı1000 RPM1300 RPM1300 RPM1000 RPM1000 RPM1000 RPM
Elektrik Tüketimi
±%20
5.5 kw/sa4 kw/sa4 kw/sa5,5 kw/sa7,5 kw/sa10 kw/sa
Elektrik Besleme*3 Fazlı
380 Volt
50 Hz
3 Fazlı
380 Volt
50 Hz
3 Fazlı
380 Volt
50 Hz
3 Fazlı
380 Volt
50 Hz
3 Fazlı
380 Volt
50 Hz
3 Fazlı
380 Volt
50 Hz
Kontrol PaneliButon PanelButon PanelButon PanelButon PanelButon PanelButon Panel
İdeal Çalışma Zamanı180 sn180 sn180 sn150 sn150 sn150 sn
Pnömatik KilitOpsiyonelOpsiyonelOpsiyonelOpsiyonelOpsiyonelOpsiyonel
Pnömatik FrenOpsiyonelOpsiyonelOpsiyonelOpsiyonelOpsiyonelOpsiyonel
Hız KontrolüOpsiyonelOpsiyonelOpsiyonelOpsiyonelOpsiyonelOpsiyonel
Geri Sarma
Kapasite170x1200 cm250x800 cm270x1000cm320x1200cm350x1200cm420x1200cm
SertifikaCE, GOST-RCE, GOST-RCE, GOST-RCE, GOST-RCE, GOST-RCE, GOST-R
Garanti1 Yıl1 Yıl1 Yıl1 Yıl1 Yıl1 Yıl
En120 cm120 cm120 cm120 cm120 cm120 cm
Yükseklik130 cm130 cm130 cm135 cm135 cm135 cm
Boy200 cm290 cm300 cm310 cm370 cm440 cm
Ağırlık430 kg450 kg500 kg800 kg850 kg950 kg
AksesuarlarHalı Aktarma
Arabası
Halı Aktarma
Arabası
Halı Aktarma
Arabası
Halı Aktarma
Arabası
Halı Aktarma
Arabası
Halı Aktarma
Arabası
*İsteğe bağlı olarak 60 Hz üretilebilir.
- Özel ölçülerde üretim yapılmaktadır.
- Galvaniz makineler sıcak galvaniz havuzlarında galvanize edilmektedir. 5 yıla kadar paslanmazlık garantisi vardır.
Ürün KoduC1326C1327C1032C1035C1042
Görsel
Kullanım Genişliği257 cm270 cm320 cm350 cm420 cm
MalzemeÇelikÇelikÇelikÇelikÇelik
İç çap355 mm397 mm477 mm477 mm477 mm
Tambur Hızı1300 RPM1300 RPM1300 RPM1300 RPM1300 RPM
Elektrik Tüketimi
±%20
4 kw/sa4 kw/sa5,5 kw/sa7,5 kw/sa10 kw/sa
Elektrik Besleme*3 Fazlı
380 Volt
50 Hz
3 Fazlı
380 Volt
50 Hz
3 Fazlı
380 Volt
50 Hz
3 Fazlı
380 Volt
50 Hz
3 Fazlı
380 Volt
50 Hz
Kontrol PaneliButon PanelButon PanelButon PanelButon PanelButon Panel
İdeal Çalışma Zamanı180 sn180 sn150 sn150 sn150 sn
Fren Sistemi
Hız Kontrolü
Yumuşak Marş
Kapasite250x800 cm270x1000cm320x1200cm350x1200cm420x1200cm
SertifikaCE, GOST-RCE, GOST-RCE, GOST-RCE, GOST-RCE, GOST-R
Garanti1 Yıl1 Yıl1 Yıl1 Yıl1 Yıl
En120 cm120 cm120 cm120 cm120 cm
Yükseklik90 cm90 cm100 cm100 cm100 cm
Boy290 cm300 cm340 cm370 cm440 cm
Ağırlık400 kg450 kg750 kg800 kg900 kg
AksesuarlarPaslanmaz Çelik GelberiPaslanmaz Çelik GelberiPaslanmaz Çelik GelberiPaslanmaz Çelik GelberiPaslanmaz Çelik Gelberi
*İsteğe bağlı olarak 60 Hz üretilebilir.
- Özel ölçülerde üretim yapılmaktadır.
- Galvaniz makineler sıcak galvaniz havuzlarında galvanize edilmektedir. 5 yıla kadar paslanmazlık garantisi vardır.

Ürün Bilgi Formu

İletişim bilgilerinizi yazarak bize ulaşabilirsiniz.
isim:*
E-Posta:
Telefon:*
-
Company:
Mesajınız:
Type the characters you see here: